Antari W-508800W Water-Based Fog Machine with Wireless Control, 3,000 CFM Output

The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.

 

Features

●  Intelligent Wireless Control System

     Each machine comes with a set of wireless receiver and transmitter as a standard controller. The working distance of wireless

     control is 50 meters in open area.

 

●  Opto-electronic Fluid Sensor

     When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect the pump from burning.

 

●  More Efficient New Heat Exchanger Design

     It can generate drier fog with smaller particles. This leads to a fairly low fog fluid consumption. Compare to the equivalent power

     consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.

 

●  New Advanced PCB (Printed Circuit Board)

     Design The new system can control temperature precisely and rule out the influence from outside environments as much as

     possible to make W series fog machines be able to work stably between – 20 and + 60 degree Celsius.

Specification

Input voltage	US  model : AC 100-120V, 50/60HZ 6.7A
	EU  model : AC 220-240V, 50/60Hz 3.5A
Rated power	800 W
Warm-up time	2 minutes (approx)
Fluid consumption	13 ml/min
Fluid tank capacity	0.8 Liters  (0.21 gallon)
Compatible fluid	Antari FLG Heavy Fog Fluid
	Antari FLR Light Fog Fluid
Operating time	60 mins at max. output
Ambient temp.range	0°C - 40°C (32°F - 104°F)
Control	Manual, Wireless
Dimension	L 315 W 128  H 218 mm
	(L 12.40 W 5.04 H 8.58 inch)
Weight	3.8 kg (8.38 lbs)