144" X 1" X .035 10/14 Tpi Bandsaw Blade

BSB14410-14
$64.95
144" X 1" X .035 10/14 Tpi Bandsaw Blade
Processing...

144" X 1" X .035 10/14 Tpi Bandsaw Blade

BSB14410-14
$64.95

Overview

Amada SVGLB High Production M-42 Bi-Metal Blade -

High Production M-42 Bi-Metal Blade

The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.

Features

  • 7 degree positive rake angle
  • Hardness of HRC 68-69
  • M-42 cobalt high speed steel edge
  • Specially designed tooth form

Advantages

  • Better tooth penetration
  • High heat resistance
  • High wear resistance

Benefits

  • Fast Cutting Rates
  • High production rate
  • Long life on moderate to difficult to cut materials
  • Low cost per cut

SGLB
Edge Material M42 HSS
Hardness of Tooth Tip 950 Hv
Wear Resistance (1 - 5) *** (3 Stars)
Chipping Resistance (1-5) ** (2 Star)

The hardness of the Tooth Tip represent Amada's average value. It is adjusted to some extent according to the types and size of the products.


Availability
Width Thickness Pitch
.75/1.1 1.1/1.5 1.5/2 2/3 3/4 4/6 5/7 6/10 8/12
3/4" 0.035           PR      
1" 0.035       MG MG PR PR S S
1 1/4" 0.042   AG   AG MG PR PR S  
1 1/2" 0.050   AG AG AG WS/MG PR PR    
2" 0.063 AG AG AG AG MG MG      
2 5/8" 0.063 AG AG AG AG MG MG      
3" 0.063 AG AG AG            

S :Standard Tooth, Straight Raker Set 
PR: 7 Degree Positive Rake 
MG:10 Degree Positive Rake 
AG:Positive Rake, Large Gullet Size 
WS:Wide Set


Specifications may change without notice at the sole discretion of Amada's Engineering Department.