120 X 1" X .035 6/10Tpi Amada SVGLB High Production M-42 Bi-Metal Blade
BSB1206-10$46.50
Overview
Amada SVGLB High Production M-42 Bi-Metal Blade -
High Production M-42 Bi-Metal Blade
The SGLB was designed to cover a broad range of cutting applications and to provide maximum efficiency in sawing wear-resistant tool steels. The blade's tough M-42 cobalt edge resists heat and abrasion, while the varied pitch tooth form expands the ranges of sizes and shapes that can be sawed successfully without changing blades.
Features
- 7 degree positive rake angle
- Hardness of HRC 68-69
- M-42 cobalt high speed steel edge
- Specially designed tooth form
Advantages
- Better tooth penetration
- High heat resistance
- High wear resistance
Benefits
- Fast Cutting Rates
- High production rate
- Long life on moderate to difficult to cut materials
- Low cost per cut
Edge Material | M42 HSS | |
---|---|---|
Hardness of Tooth Tip | 950 Hv | |
Wear Resistance (1 - 5) | *** | (3 Stars) |
Chipping Resistance (1-5) | ** | (2 Star) |
The hardness of the Tooth Tip represent Amada's average value. It is adjusted to some extent according to the types and size of the products.
Width | Thickness | Pitch | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
.75/1.1 | 1.1/1.5 | 1.5/2 | 2/3 | 3/4 | 4/6 | 5/7 | 6/10 | 8/12 | ||
3/4" | 0.035 | PR | ||||||||
1" | 0.035 | MG | MG | PR | PR | S | S | |||
1 1/4" | 0.042 | AG | AG | MG | PR | PR | S | |||
1 1/2" | 0.050 | AG | AG | AG | WS/MG | PR | PR | |||
2" | 0.063 | AG | AG | AG | AG | MG | MG | |||
2 5/8" | 0.063 | AG | AG | AG | AG | MG | MG | |||
3" | 0.063 | AG | AG | AG |
S :Standard Tooth, Straight Raker Set
PR: 7 Degree Positive Rake
MG:10 Degree Positive Rake
AG:Positive Rake, Large Gullet Size
WS:Wide Set
Specifications may change without notice at the sole discretion of Amada's Engineering Department.